MCP809M3-2.63/NOPB Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. It is packaged with Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. In this PMIC, you can find TO-236-3, SC-59, SOT-23-3 functions for your reference. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 3V volt supply. A supply voltage of 1 is used to conduct the PMIC chip. Using Surface Mount, IC management is mounted. A IC power such as this can be classified as a Power Management Circuits power management system. 3 pins are on the supervisor. Supply voltage (Vsup) should be at least 1V for this power management. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~105°C TA. It is always advisable to use MCP809, the base supervisor number, when searching for similar PMICs from the manufacturer.
MCP809M3-2.63/NOPB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
MCP809M3-2.63/NOPB Applications
There are a lot of Texas Instruments MCP809M3-2.63/NOPB Voltage Supervisors applications.
- Military electronics
- Cloud computing
- Power distribution systems of CCU
- Multi-voltage system
- Smart meter
- Computer applications
- Sensitive sensors
- Microprocessor system
- Insulation fault location system
- External alarm
