Welcome to Hotenda.com Online Store!

logo
userjoin
Home

MAX3318CDBRG4

MAX3318CDBRG4

MAX3318CDBRG4

Texas Instruments

20 Terminations2.5V 20 Pin MAX3318 Receivers2/2 Drivers/Receivers2 Functions

SOT-23

MAX3318CDBRG4 Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Factory Lead Time 6 Weeks
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SSOP (0.209, 5.30mm Width)
Number of Pins 20
Weight 156.687814mg
Operating Temperature0°C~70°C
PackagingTape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part StatusActive
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Type Transceiver
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Line Driver or Receivers
Voltage - Supply 2.25V~3V
Terminal Position DUAL
Terminal FormGULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 2.5V
Terminal Pitch0.65mm
[email protected] Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number MAX3318
Pin Count20
Qualification StatusNot Qualified
Operating Supply Voltage2.5V
Nominal Supply Current2mA
Logic Function Receiver, Transceiver
Data Rate460Kbps
Differential OutputNO
Output Polarity TRUE
Protocol RS232
Input Characteristics SCHMITT TRIGGER
Number of Drivers/Receivers 2/2
Receiver Number of Bits 2
Duplex Full
Receiver Hysteresis300mV
Number of Drivers 2
Number of Transceivers 1
Supply Voltage1-Nom 2.5V
Output Low Current-Max 0.0005A
Out Swing-Min 7.4 V
Height 2mm
Length 7.2mm
Width 5.3mm
Thickness 1.95mm
RoHS StatusROHS3 Compliant
Lead Free Lead Free
In-Stock:2554 items

Pricing & Ordering

QuantityUnit PriceExt. Price
1$1.218322$1.218322
10$1.149360$11.4936
100$1.084302$108.4302
500$1.022926$511.463
1000$0.965025$965.025

MAX3318CDBRG4 Product Details

MAX3318CDBRG4 Overview


LED drivers benefit from this IC's enhanced 20-SSOP (0.209, 5.30mm Width) package.There is a Tape & Reel (TR) package for this receiver.As a Transceiver can transceiver, this part has enabled many applications to be served.Any Surface Mount-type PCB or development board can be used with this wide receiver.A differential driver like this uses 2.25V~3V of power.As many as 2/2 receivers/drivers are eligible for use on this electronic part.For applications where the operating temperature is 0°C~70°C, this ic receiver was designed primarily.An output voltage range of 2.5V is sufficient to run this line driver ic efficiently.There are 20 terminations in this wide receiver so that signals can be driven from the data and received.There are 20 pinouts available on this transceiver which are market standard.Since the part number MAX3318 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.It is a 20-pin driver IC with enhanced power dissipation controls.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.As a general rule, this receiver has a resolution of 2 bits that is usually specified.There is a voltage supply of 2.5V required in order for this transceiver module to be operated.It is possible to subcategoriLine Driver or Receiverse this rf transceiver module as Line Driver or Receivers.ICs implement a total of 1 transceivers.The integrator circuit comes with embedded 2 drivers.

MAX3318CDBRG4 Features


Tape & Reel (TR) package
20 pin count
20 pins

MAX3318CDBRG4 Applications


There are a lot of Texas Instruments MAX3318CDBRG4 Drivers/Receivers/Transceivers applications.

  • Wireless communication
  • Fiber distributed data interface (FDDI)
  • interconnection between computers
  • Single fiber bidirectional application
  • Copper connection network
  • LAN, SAN, WAN (local, storage, work area networks)
  • Satellite ground stations
  • Satellite communications networks
  • Remote controls
  • Remote controls

Get Subscriber

Enter Your Email Address, Get the Latest News