LPV358DDURG4 Overview
The linear amplifier is packaged in a 8-VFSOP (0.091, 2.30mm Width) case. A General Purpose-type buffer amplifier is shown here. A Tape & Reel (TR) case is used for delivering the op amp. In recent months, the number of terminations has approached 8. The pins on this board total to 8 in total. Please take in mind that this instrumentation amplifier should be run at 5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 8 pins are present on the instrumentation amplifier. Regarding input offset voltage, buffer amplifier rates 7mV voltage. Surface Mount is the recommended mounting type of operational amplifiers. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . Using an 15μA supply current, this operational amplifier ics can be operated. 100dB should be the voltage gain. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. According to the specifications of the buffer op amp, the operating supply voltage is rated at 2. The instrumentation amplifier is packed in the form of TAPE AND REEL.
LPV358DDURG4 Features
8 Pins
supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail
LPV358DDURG4 Applications
There are a lot of Texas Instruments LPV358DDURG4 Instrumentational OP Amps applications.
- Broadcasting
- Instrumentation
- Power transmission
- RF cable systems
- ECG equipment
- Micro signal measurement
- Hand-held batteries
- pH (acidity)
- Image computer boards
- Signal amplification
