LPC662IM Overview
It is packaged in an SOIC-case that protects the operational amplifiers from damage. An op amp of this type is a OPERATIONAL AMPLIFIER-type. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 6.3mV for input offset voltage. There should be no change in the voltage gain at 120dB. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. The operating supply voltage of the buffer op amp is rated at 15V. It is important to keep in mind that the power supply voltage of this electric component is below 15.5V, which is suitable. Keeping the linear amplifier's supply voltage above 4.75V is recommended. The linear amplifier has 2 amplifiers.
LPC662IM Features
8 Pins
supply voltage of 5V
120dB voltage gain
LPC662IM Applications
There are a lot of Texas Instruments
LPC662IM Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
