LP5524TM-5/NOPB Overview
Board space is saved by its 9-WFBGA package.Surface Mount represents this mounting method.With high reliability and efficiency, this emerges as a Linear.It is possible for the led driver ic to operate normally at -40°C~85°C TA.Backlight has considerable advantages.The terminations 9 are designed for its operation.It has a base of 9 pins.Undetermined failures will occur if the voltage supply is less than 2.7V.There are estimated to be 4 segments.The device has been mounted on the Surface Mount.The base part number for this LED driver is LP5524.5.5V is an acceptable maximum value for the supply voltage.6 pins are used on the device.In addition, it can also be categorized into Display Drivers based on its characteristics.As a result, it runs at a minimal voltage of 2.7V in order to achieve the best efficiency.With a minimum supply current less than 210μA, this device achieves high efficiency.25mA is the maximum amount of current that can be supplied to the load.When no external factors are present, there is 170μA current consumption.
LP5524TM-5/NOPB Features
Available in the 9-WFBGA package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
LP5524TM-5/NOPB Applications
There are a lot of Texas Instruments LP5524TM-5/NOPB LED Driver ICs applications.
- Auxiliary lights for on-vehicle cameras
- Replacement lamps
- Architectural lighting
- Dimmable LED for vehicle interiors
- Panel lighting
- High-end retail lighting
- Down lighting
- General lighting
- Stage and Studio lighting
- LED Lighting PFCs, Linear Dimmable
