LP3470M5X-3.08/NOPB Overview
There are 5 mounting terminals on the voltage supervisor, each of which has a different function. There is a Tape & Reel (TR)-packaging method applied to IC management. For your reference, this IC power includes a list of 1 functions. A series of 1 channels can be found on this supervisor. As a reference, this IC power includes SC-74A, SOT-753 functions for your convenience. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Packages are specified to have an average peak reflow temperature of 260. There is a voltage supply of 2.4V for the PMIC chip, and the chip conducts at that voltage. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is provided by Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, it has 5 pins on IC management. Power managment ic pin count is 5. IC management can only work with a supply voltage of 500mV volts. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Power management' mounting is recommended to be done with the Surface Mount type of mounting. This range of temperature should be set for the supervisors: -20°C~85°C TJ. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. It is estimated that the voltage supervisor's supply current is 16μA. To find similar IC managements from the manufacturer, you can always search by LP3470.
LP3470M5X-3.08/NOPB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 500mV
16μA operating supply current
LP3470M5X-3.08/NOPB Applications
There are a lot of Texas Instruments LP3470M5X-3.08/NOPB Voltage Supervisors applications.
- External alarm
- Detection of phase loss
- Battery cars
- Battery-powered equipment
- Power communication system
- Insulation fault location system
- Detection of phase imbalance
- Radio
- Automotive permanent magnet synchronous motors
- Efficient information transmission
