LP3470M5-4.63/NOPB Overview
Power management is mounted through 5 terminals. A Cut Tape (CT) package is used to package the power management. In this PMIC, you can find 1 functions for your reference. It is possible to find on this power management a series of 1 channels. Please refer to power management for SC-74A, SOT-753 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. The supervisor is always powered by a 2.4V volt supply. IC management conducts in a 1-voltage supply. By Surface Mount, IC management has been mounted. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. There are a total of 5 pins on power management. There are 5 pins on the power managment ic. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 500mV. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. It is recommended that the supervisor be set to this temperature: -20°C~85°C TJ. Power management has an output of Open Drain or Open Collector during operation. There is a supply current of 16μA for the power management. You can always use LP3470, the base supervisor number, to search for similar PMICs of the manufacturer.
LP3470M5-4.63/NOPB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 500mV
16μA operating supply current
LP3470M5-4.63/NOPB Applications
There are a lot of Texas Instruments LP3470M5-4.63/NOPB Voltage Supervisors applications.
- Satellite navigation
- Important electronics for automotive safety
- Radar
- Linux and server computing
- Battery cars
- Detection of phase sequence
- Automotive permanent magnet synchronous motors
- Detection of phase loss
- Embedded computing
- Military electronics
