LP3470IM5-4.8 Overview
A total of 5 terminals are used to mount this power management. It is packaged with Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. There are 1 channels on this power managment ic that can be found in a series. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts at a voltage of 1V. Power ics operate at 1 supply voltages. The mount is provided by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. Pin count of the power management is 5. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 500mV. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The supervisors should be set to the following temperature: -40°C~85°C TJ. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 16μA. To find similar IC managements from the manufacturer, you can always search by LP3470.
LP3470IM5-4.8 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 500mV
16μA operating supply current
LP3470IM5-4.8 Applications
There are a lot of Texas Instruments LP3470IM5-4.8 Voltage Supervisors applications.
- External alarm
- Telecommunications equipment
- Consumer electronics
- Medical-specific isolation transformer
- Solar power charger
- Detection of phase sequence
- Rechargeable batteries
- DVR
- Fire equipment power monitoring system
- emergency room
