LP3470IM5-2.75 Overview
This power management consists of 5 mounting terminals on which it can be mounted. It is packaged with Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. On this supervisor, there is a series of 1 channels that can be found. IC management is packaged as a SC-74A, SOT-753 package. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. IC management is specified that the package peak reflow temperature should be 260. IC management conducts in a 1V-voltage supply. A supply voltage of 1 is used to conduct the PMIC chip. Power management is included in the Surface Mount mount. The power management belongs to the Power Management Circuits subcategory. There are a total of 5 pins on power management. There are 5 pins on the power managment ic. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 500mV volts. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. In this case, Surface Mount is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TJ. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. There is a supply current of 16μA for the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to LP3470, which is the base power ics number.
LP3470IM5-2.75 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 500mV
16μA operating supply current
LP3470IM5-2.75 Applications
There are a lot of Texas Instruments LP3470IM5-2.75 Voltage Supervisors applications.
- FPGA design
- Household appliances
- Digitally controlled LDO regulators circuit
- DSP
- Electronics installed in the vehicle
- Functional modules
- DVR
- Multi-voltage system
- Transformer load monitoring equipment
- Analog circuit
