LP324PWRG4 Overview
The linear amplifier is packaged in a TSSOP case which makes it easy for the consumer to handle. Op amps are OPERATIONAL AMPLIFIER types of amplifier on the chip. There have been a total of 14 terminations over the past year. In this case, there are 14 pins on the board. Please take in mind that op amp should be run at 5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 14 pins are available on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 2mV. You can run this op amp ic on 85μA . Op amp is a member of the 100dB's 100dB family. Instrumentation amplifier has 4 channels on it. Using this buffer op amp requires a temperature of at least 0°C. It is recommended that op amp be used at temperatures below 70°C. The operating supply voltage of instrumentation amplifier is rated 16V voltage. To pack the operational amplifier ics, TAPE AND REEL is adopted as the packing method. With regard tp supply voltage, op amp is used under 32V. The linear amplifier's supply voltage should be higher than 3V. There should be a dual supply voltage of 16V for you to conduct this electrical part.
LP324PWRG4 Features
14 Pins
supply voltage of 5V
100dB voltage gain
LP324PWRG4 Applications
There are a lot of Texas Instruments
LP324PWRG4 Instrumentational OP Amps applications.
- Proportional operation circuits
- Inverse/same-phase proportional circuit
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
