LOG101AIDE4 Overview
It is packaged in an SOIC-case that protects the operational amplifiers from damage. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Analog Computational Functions op amp ic can be identified by the fact that this is a type of Analog Computational Functions device. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 1.5mV for input offset voltage. A supply current of 1mA can be used to operate this linear amplifier. There are a total of 1 channels available on the op amps. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. It is important to keep in mind that the power supply voltage of this electric component is below 18V, which is suitable. Keeping the linear amplifier's supply voltage above 4.5V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 18V volts. This linear amplifier also utiliLOG OR ANTILOG AMPLIFIERes an analog IC known as a LOG OR ANTILOG AMPLIFIER. The linear amplifier has 2 amplifiers.
LOG101AIDE4 Features
8 Pins
supply voltage of 5V
LOG101AIDE4 Applications
There are a lot of Texas Instruments
LOG101AIDE4 Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
