LMV934IPWE4 Overview
Packaged in a 14-TSSOP (0.173, 4.40mm Width) case, the buffer op amp is ready to use. This is a General Purpose type op amp. In the case of Tube cases, linear amplifier will be delivered. We are approaching the 14h termination of the year. In this case, there are 14 pins on the board. It would be helpful if you could remember that this op amp ic should be powered by an 1.8V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. In total, the buffer amplifier consists of 14 pins. Regarding input offset voltage, op amp rates 5.5mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 116μA . There should be no change in the voltage gain at 100dB. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 4.
LMV934IPWE4 Features
14 Pins
supply voltage of 1.8V
100dB voltage gain
Output Type: Rail-to-Rail
LMV934IPWE4 Applications
There are a lot of Texas Instruments LMV934IPWE4 Instrumentational OP Amps applications.
- Band-pass filter
- Communication
- Power transmission
- Integrator circuits
- Home audio systems
- Fast A/D and D/A converters
- Multiplication circuits
- Tablets
- Non-polarized electrodes
- Gaming industry
