LMV358IPWR Overview
In order to protect the op amps, a 8-TSSOP (0.173, 4.40mm Width) case is used. An op amp of this type is a General Purpose-type. There is a Cut Tape (CT) case that is delivered with the instrumentation amplifiers. We are approaching the 8h termination of the year. Buffer amplifier has a total of 8 pins on it. Please take in mind that op amp should be run at 2.7V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. An 8-pin op amp ic is included in the package. Op amp ic rates 7mV for input offset voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 210μA . It is recommended to keep the voltage gain at 100dB at all times. There are a total of 2 channels available on the op amps. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. For the packing of the instrumentation amplifier, TR is adopted.
LMV358IPWR Features
8 Pins
supply voltage of 2.7V
100dB voltage gain
Output Type: Rail-to-Rail
LMV358IPWR Applications
There are a lot of Texas Instruments LMV358IPWR Instrumentational OP Amps applications.
- Band-pass filter
- Video conversion and routing
- Inverse/same-phase proportional circuit
- Voltage regulation circuit
- Signal filtering
- Micro signal measurement
- Automotive sensors
- Scintillation detectors
- Cinema or auditorium audio system
- RF cable systems
