LMP8602MA Overview
There is a SOIC case in which the instrumentation amplifier is packaged. A INSTRUMENTATION AMPLIFIER-type buffer amplifier is shown here. In the case of Rail/Tube cases, linear amplifier will be delivered. The number of terminations is approaching the 8 mark. There are a total of 8 pins on this op amp. I would like to remind you that this buffer op amp should be powered by an 3.3V battery. In more specific terms, this linear amplifier can be categoriInstrumentation Amplifiered as a Instrumentation Amplifier-type device. Linear amplifier includes 8 pins. The input offset voltage is 1mV. It is recommended to keep the voltage gain at 34.02dB at all times. Op amp ic has 1 channels. In order for op amp to function properly, the temperature should not be lower than -40°C degrees Celsius. Use op amp only at temperatures no higher than 125°C. According to the specifications of the buffer op amp, the operating supply voltage is rated at 2. The operating supply voltage of the buffer op amp is rated at 5V. With regard to the supply voltage, this electrical component is capable of working from under 5.5V. As a rule of thumb, the supply voltage of the op amp should not be lower than 3V.
LMP8602MA Features
8 Pins
supply voltage of 3.3V
34.02dB voltage gain
LMP8602MA Applications
There are a lot of Texas Instruments LMP8602MA Instrumentational OP Amps applications.
- High/low-pass filter circuit
- Television
- Micro signal measurement
- Band-stop filter
- Instrumentation
- Division circuits
- Car stereo
- Hand-held batteries
- Multiplication circuits
- High-frequency data acquisition systems
