LMP2234AMAE Overview
In the package, you will find a SOIC-case to contain the op amp ic. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. A total of 14 pins are located on this board. This linear amplifier should be powered by an 2.5V battery. The op amp ic has an array of 14 pins on it. Op amp rates 150μV as input offset voltage. You should keep the voltage gain at 120dB for the time being. To operate this buffer amplifier, the temperature must not be lower than -40°C. A temperature greater than 125°C should not be used for the operation of buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5V. This electric component can work from a voltage of under 5.5V as far as supply voltage is concerned. A voltage of 1.8V or higher is recommended for the linear amplifier's supply voltage. The buffer amplifier consists of 4 amplifiers.
LMP2234AMAE Features
14 Pins
supply voltage of 2.5V
120dB voltage gain
LMP2234AMAE Applications
There are a lot of Texas Instruments
LMP2234AMAE Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
