LMK62E2-156M25SIAR Overview
In the packaging, the clock timer is enclosed with the 6-SMD Module code on the back. 156.25MHz is set as the frequency of the programmable timer.It is used to pack in Tape & Reel (TR) case. Surface Mount is the recommended mounting type. It is possible for the programmable timer to supply a voltage of 3.135V~3.465V that can be used to operate.The type of chips can be divided into Clock Oscillator. The operating temperature of this timer clock is -40°C~85°C TA. To keep the clock timer's supply current at 95mA. It is based on LMK62E2. The timer clock contains 6 pins. The supply voltage of the programmable timer can rate 3.3V. You can read the timer clock's additional feature in the follwing: ENABLE/DISABLE FUNCTION; DIFFERENTIAL OUTPUT; TR, 13 INCH. On operating frequency, it's available in the range of 156.25MHz. The number of the chip's terminations sums up to 6.
LMK62E2-156M25SIAR Features
Operate frequency at 156.25MHz
Package / Case: Tape & Reel (TR)
Mounting Type:Surface Mount
Current - Supply：95mA
Additional Feature: ENABLE/DISABLE FUNCTION; DIFFERENTIAL OUTPUT; TR, 13 INCH
LMK62E2-156M25SIAR Applications
There are a lot of Texas Instruments LMK62E2-156M25SIAR Programmable Timers & Oscillators applications.
- Clutch Actuator circuit
- Watchdog Timers
- Consumer Electronics
- “Heartbeat” Timers
- Precision timing
- Remote current sensor
- Building Automation
- Periodic “Wake-Up” Call
- Sensor Node
- Delay circuits
