LMC7211BIM5 Overview
For convenience, it is packaged in SC-74A, SOT-753 .There is a Push-Pull output type for this comparator.Electronic comparator is shipped by Tape & Reel (TR) .The comparator has a total of 5 terminals.The electrical component here belongs to the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.The type of the chip can be classified as General Purpose .Electronic comparator has 5 pins.The recommended mounting method is Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.The comparator has a pin count of 5 .You can find more pin-to-pin solutions by searching LMC7211 .As a result, this comparator displays a quiescent current of 14μA .This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 14μA when using the device.A supply current exceeding 14μA may result in the comparator malfunctioning.You can input a maximum current of 40 fA into this device.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 100dB .The device is packed in TR and is intended for general use (as an element in the ADC circuit).
LMC7211BIM5 Features
Push-Pull output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 14μA
Voltage Gain: 100dB
LMC7211BIM5 Applications
There are a lot of Texas Instruments
LMC7211BIM5 linear comparators applications.
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
