LMC6042AIN Overview
In order to protect the op amps, a 8-DIP (0.300, 7.62mm) case is used. Op amps are General Purpose types of amplifier on the chip. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. The number of terminations approaches 8. The pins on this board total to 8 in total. It is important to remember that this op amp should be operated at a voltage of 5V volts. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 8 pins are included on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 1mV. The mounting type that is recommended for this electrical part is Through Hole. With regard to operating temperature, this op amp functions well at -40°C~85°C. A supply current of 26μA can be used to operate this linear amplifier. There should be no change in the voltage gain at 120dB. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The op amp is rated for an operating supply voltage of 2.
LMC6042AIN Features
8 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
LMC6042AIN Applications
There are a lot of Texas Instruments LMC6042AIN Instrumentational OP Amps applications.
- Micro signal measurement
- Scintillation detectors
- Logarithmic operation circuits
- Polarized electrodes
- Proportional counter tubes
- Wireless base stations
- Navigation
- Semiconductor detectors
- Oscilloscopes
- Differentiator circuits
