LM810M3X-4.63/NOPB Overview
It is mounted through 3 terminals on the power management. A Tape & Reel (TR) package is used to package the power management. The purpose of this IC management is to provide you with a reference of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. Please find attached TO-236-3, SC-59, SOT-23-3 functions for your reference in this IC power. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. In a 5V supply voltage, the power management conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Surface Mount mounts power management on the wall. A IC power such as this can be classified as a Power Management Circuits power management system. In total, the power management has 3 pins in it. Pin count of the power management is 3. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Surface Mount mounting is recommended. This power management is the recommended temperature range for the supervisors: -40°C~105°C TA. Power management has an output of Push-Pull, Totem Pole during operation. The supervisor's supply current is specified to 18μA. For similar manage ics search of the manufacturer, you can always refer to LM810, the base PMIC number.
LM810M3X-4.63/NOPB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
18μA operating supply current
LM810M3X-4.63/NOPB Applications
There are a lot of Texas Instruments LM810M3X-4.63/NOPB Voltage Supervisors applications.
- Detection of phase imbalance
- DSP
- Medical-specific isolation transformer
- Power distribution systems of ICU
- Automotive power systems
- Utility meter
- Microprocessor system
- Data storage applications
- Leakage current detection
- Radar
