LM75BIMM-5/NOPB Overview
The analog sensors are packaged in the Tape & Reel (TR) for safety reasons. It is important to ensure the safety of the analog sensors by packaging them in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) packages. The sensor has a pin count of 8 for proper operation. Electronic part with 8 terminations. During operation, the analog sensors may supply 280μA current. In the DC circuit, this sensor should provide the maximum voltage of 5.5V. Nevertheless, this magnetic switch can supply a DC circuit with a voltage as low as 3V. Sensors with analog inputs should have 500μA current flowing from the GND terminal. The sensor has a nominal capacity of providing 280μA current. In order to achieve optimal performance, the sensor's current output should be 10μA.
LM75BIMM-5/NOPB Features
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Tape & Reel (TR) Package
Operating Temperature: -55°C~125°C
Supply Voltage: 3V~5.5V
8 Pins
Local Sensing Temperature: -55°C~125°C
8 Terminations
Highest (Lowest) Accuracy: ±2°C (±3°C)
Sensor Type: Digital, Local
LM75BIMM-5/NOPB Applications
There are a lot of Texas Instruments LM75BIMM-5/NOPB Analog & Digital Sensors applications.
- Printers
- Temperature compensation for various circuits
- Temperature compensation and sensing in Automotive
- Data Communication Equipment
- System Thermal Management
- Any Thermally-Sensitive System
- Notebooks
- Temperature Regulators
- GPS Equipment
- Various engine control units
