LM60CIM3/NOPB Overview
The Cut Tape (CT) package protects these analog sensors. Analog sensors are protected from damage by being placed in TO-236-3, SC-59, SOT-23-3 packages. For the proper operation of this sensor, there are 3 pins. This electronic part has 3 terminations. In operation, the analog sensors may supply a voltage of 82μA. DC circuit should have a maximum voltage of 10V. However, the minimum voltage that this magnetic switch can supply in the DC circuit is 2.7V. For analog sensors, the current flowing from GND should be 82μA. The sensor works as long as it receives 110μA current. It is recommended that the sensor's current output be set to 10mA for optimum performance. Sensors generally output 580mV voltages.
LM60CIM3/NOPB Features
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Cut Tape (CT) Package
Operating Temperature: -40°C~125°C
Supply Voltage: 2.7V~10V
3 Pins
Local Sensing Temperature: -40°C~125°C
3 Terminations
Highest (Lowest) Accuracy: ±3°C (±4°C)
Sensor Type: Analog, Local
LM60CIM3/NOPB Applications
There are a lot of Texas Instruments LM60CIM3/NOPB Analog & Digital Sensors applications.
- Cellular Phones
- HVAC
- Motor protection
- Circuits for ETC equipment
- Cell Phones
- Temperature compensation and sensing in Air-flow sensor
- Automotive
- Limit temperature monitoring
- Temperature-Controlled Fans
- Digital Cameras
