LM5117PMH/NOPB Overview
As a result of 20-PowerTSSOP (0.173, 4.40mm Width) compact design, the switching controller is compatible with most applications. 1 outputs are supported by the dc motor controller. An enclosure of Tube is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). 5.5V~65V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. The switching controller is capable of switching at the 200kHz 480kHz position. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Frequency Control, Ramp, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. There are many different types of terminations for 20. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 48V. A search for "LM5117" will reveal other relevant dc to dc converter ics. 20 pins are present on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. Statistically, the DC regulator outputs 800mV voltage. It's important to remember that the dc dc regulator's normaloutput current is 20A, so you should note it down when starting a new project. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. Switching controller operates at 750kHz Hz. As long as the dc switching is in a dormant state, it utilizes 4.8mA. In order to limit the voltage of a dc switcher whose maximum input voltage is 65V, it must be limited by the user. Voltage 5.5V is necessary for the supply. Input current cannot exceed 20A with this dc switcher. At its maximum, the switching converter can output 62V volts. At its lowest voltage, the voltage controller does not produce less than 800mV.
LM5117PMH/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz 480kHz
Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Frequency: 750kHz
LM5117PMH/NOPB Applications
There are a lot of Texas Instruments
LM5117PMH/NOPB DC to DC converter applications.
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment
- Balance equipment
- Industrial robots
- Industrial controllers
- Die casting equipment
- Injection molding machinery
