LM5085MY/NOPB Overview
In the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. There is a Tape & Reel (TR) solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 4.5V~75V volts and has 4.5V~75V supply voltage. Suitable for working in an dc switcher that has a -40°C~125°C TJ. It can switch at Up to 1MHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Current Limit, Enable, On Time Control is included in the dcdc regulator. A SWITCHING REGULATOR analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 8 terminations. There is a DC switcher's nominal voltage of 48V. In addition to "LM5085", there are other relevant dc to dc converter ics you can find. There are 8 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 75V voltage based on test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 1.75A. Voltage regulator dc to dc is designed to operate at 100 % duty cycle during power-ups and power-downs to ensure reliability. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. DC regulator1MHz has the maximum frequency. In dormant mode, 1.3mA is used. Since the dc switcher's maximum input voltage is 75V, the voltage must be regulated accordingly. Voltage 4.5V must be supplied. An output current greater than 10A cannot be provided by the dc switcher. Depending on the datasheet, the switching converter can output 75V volts at its peak. A voltage controller's lowest output voltage cannot be less than 1.25V.
LM5085MY/NOPB Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Current Limit, Enable, On Time Control
Max Duty Cycle: 100 %
LM5085MY/NOPB Applications
There are a lot of Texas Instruments
LM5085MY/NOPB DC to DC converter applications.
- Network technology
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment
- Balance equipment
- Industrial robots
- Industrial controllers
- Die casting equipment
