LM4864MM/NOPB Overview
There is a device embedded in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .Amp parts is recommended that the chip be packaged in a Cut Tape (CT) case.Amp parts is possible to terminate a transmission line wAmp partsh a device matching Amp partss characteristic impedance, referred to as a 8 termination.1-Channel (Mono) is the output configured for it.The device is of type Class AB .The 8 pins are pronged contacts which are part of a signal interface in a computer or other communication device.Electronic parts are mounted in the way of Surface Mount .Amp parts is powered by a voltage of 2.7V~5.5V volts.1 channels are present on the device.Operation can be ensured by Shutdown, Thermal Protection .A temperature greater than -40°C~85°C TA should not be used.There are 8 pins present on this device.This is a member of the LM4864 family.The electronic part is mounted in the way of Surface Mount .As a result of the limAmp partsations of this electronic part, Amp parts has a maximum output power of 725mW kWh per hour.To ensure normal operation, the supply voltage (Vsup) must be maintained above 2.7V .This electronic part has a Single supply type.This is a member of the Boomer® series.3.6mA external influences affect the amount of quiescent current consumed by this device.
LM4864MM/NOPB Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
8 pin count
LM4864 family
725mW kWh per hour
Boomer® series
LM4864MM/NOPB Applications
There are a lot of Texas Instruments
LM4864MM/NOPB audio amplifiers applications.
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video and image computer boards
- Medical instruments
- Television broadcasting equipment
