LM4852ITL/NOPB Overview
In the 18-WFBGA package, it is embedded.In this case, it is packaged as Cut Tape (CT) .In addition, there are 18 terminations, which involve the termination of a transmission line with a device that matches the characteristic impedance of the line.In the configuration, 1-Channel (Mono) with Stereo Headphones is used as the output.This electrical device is classified as type Class AB .As part of a signal interface in a computer or other communication device, there are 18 pins, which are pronged contacts.In this case, the electronic part is mounted in the way of Surface Mount .There is 2.6V~5.5V voltage supply to this electrical device.3 channels are available on the device.Operating with Depop, I2C, Mute, Shutdown, Thermal Protection, Volume Control is possible.Temperatures should not exceed -40°C~85°C TA .There are 18 pins on this device.Amp parts belongs to the LM4852 family.In this case, the electronic part is mounted in the way of Surface Mount .According to the manufacturer, the maximum output power of this electronic component is 1.5W kWh per hour.A normal operation requires a supply voltage (Vsup) above 2.6V .In this case, the maximum supply voltage (Vsup) reaches 5V .Power is supplied by a 3/5V volt source.Amp parts is a member of the Boomer® series of electronic parts.60 MILLI WATT POWER OUTPUT AT THE HANDSFREE SPEAKER is the feature of the chip.
LM4852ITL/NOPB Features
18-WFBGA package
18 pin count
LM4852 family
1.5W kWh per hour
Boomer® series
LM4852ITL/NOPB Applications
There are a lot of Texas Instruments
LM4852ITL/NOPB audio amplifiers applications.
- single/dual op amp sum and difference circuits
- Integrator and differentiator circuits
- Logarithmic and exponential operation circuits
- Multiplication and division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
