LM3824MM-2.0 Overview
There is a package called Cut Tape (CT) that contains buck boost converter.In this case, voltage regulator has been packaged in the same way as 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).Current regulator is mounted by Surface Mount.In order to maintain a safe operating environment, the temperature cannot exceed -40°C~85°C.There is a support for voltages of 2V~5.5V as input voltages for this voltage regulator.In addition to the 8 termination, there are a number of terminations that are used, which are achieved by terminating a transmission line with a voltage regulator that matches the characteristic impedance of the line.As part of the LM3824 family, current regulator belongs to this class.There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications constant current regulator. This electronic part is mounted in the way of Surface Mount.There is no reason why the constant current cannot work as long as it is powered by a 3.6VV power source.This power converter employs an analog IC called ANALOG CIRCUIT.Part Power Management Circuits consists of these current regulations as well as other current regulations.In order to ensure proper operation, the supply voltage (Vsup) must be greater than 2V.A maximum current supply (Isup) is supplied for its operation when the boost converter reaches its limit (0.15mA).Upon reaching 5.25V, the supply voltage (Vsup) supplied for its operation reaches its maximum level.In order for current regulation to operate, current regulation requires 2/5.25V power supplies.
LM3824MM-2.0 Features
Cut Tape (CT) package
LM3824 family
2/5.25V power supplies
LM3824MM-2.0 Applications
There are a lot of Texas Instruments LM3824MM-2.0 Current Regulation/Managements applications.
- DC-to-dc converters
- Power management
- Automotive current measurement
- Over-current protection
- Battery management
- Current sensing
- Power supply current measurement
- Motor controls
- Programmable current source
- Vehicle dynamic controls
