LM3722EM5-4.63/NOPB Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. Power management is packaged in a Tape & Reel (TR) way. In this PMIC, you can find 1 functions for your reference. It is possible to find on this power management a series of 1 channels. Please refer to power management for SC-74A, SOT-753 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. IC management conducts in a 5V-voltage supply. In a 1 supply voltage, the PMIC chip conducts. The mount is attached to Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. In total, it has 5 pins on IC management. 5 pins make up the power management. It is recommended that Vsup should not be less than 1V for this IC power. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. You can always use LM3722, the base supervisor number, to search for similar PMICs of the manufacturer. There is a requirement for 5V power to power this power management. A maximum supply temperature of 15μA can be used with this power management.
LM3722EM5-4.63/NOPB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
LM3722EM5-4.63/NOPB Applications
There are a lot of Texas Instruments LM3722EM5-4.63/NOPB Voltage Supervisors applications.
- Military communications
- Transformer load monitoring equipment
- Insulation fault location system
- Battery cars
- Electronics installed in the vehicle
- Important electronics for automotive protection
- Cloud computing
- Kitchen appliances
- Analog circuit
- Magnetic resonance imaging
