LM3475MF Overview
In the SC-74A, SOT-753 package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. There is a Tape & Reel (TR) solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 2.7V~10V volts and has 2.7V~10V supply voltage. Suitable for working in an dc switcher that has a -40°C~125°C TJ. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Enable is included in the dcdc regulator. A SWITCHING REGULATOR analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 5 terminations. This dc dc converter ic uses a variety of control techniques, including HYSTERETIC CURRENT MODE. There is a DC switcher's nominal voltage of 5V. In addition to "LM3475", there are other relevant dc to dc converter ics you can find. There are 5 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 10V voltage based on test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 5A. Voltage regulator dc to dc is designed to operate at 100 % duty cycle during power-ups and power-downs to ensure reliability. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. A frequency of 2MHz is set for the switching controller. In dormant mode, 260μA is used. Since the dc switcher's maximum input voltage is 10V, the voltage must be regulated accordingly. Voltage 2.7V must be supplied. An output current greater than 5A cannot be provided by the dc switcher. Depending on the datasheet, the switching converter can output 10V volts at its peak. A voltage controller's lowest output voltage cannot be less than 800mV. The frequency at which this controller can perform well is 2MHz.
LM3475MF Features
Transistor Driver Outputs
Enable
HYSTERETIC CURRENT MODE
Max Duty Cycle: 100 %
Frequency: 2MHz
Switching Frequency: 2MHz
LM3475MF Applications
There are a lot of Texas Instruments
LM3475MF DC to DC converter applications.
- Network technology
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment
- Balance equipment
- Industrial robots
- Industrial controllers
- Die casting equipment
