LM339APWRE4 Overview
It is packaged in an TSSOP-case that protects the operational amplifiers from damage. An op amp of this type is a COMPARATOR-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 14 terminations this year. A total of 14 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 14 pins. Op amp ic rates 3mV for input offset voltage. There should be no change in the voltage gain at 106.02dB. There are a total of 4 channels available on the op amps. One of its many advantages is that buffer op amp outputs TTL signals. This instrumentation amplifier cannot operate below 0°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 70°C. It is important to keep in mind that the power supply voltage of this electric component is below 30V, which is suitable. Keeping the linear amplifier's supply voltage above 2V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 15V volts. The quiescent current is 2.5mA.
LM339APWRE4 Features
14 Pins
supply voltage of 5V
106.02dB voltage gain
Output Type: TTL
LM339APWRE4 Applications
There are a lot of Texas Instruments
LM339APWRE4 Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
