LM331N Overview
As part of the 8-DIP (0.300, 7.62mm) package, it is embedded. The electronic part is located in the direction of Through Hole. There is a package in the way of Tube. Voltage to Frequency is the type of this electrical device. As a matter of fact, there are 8 terminations, which involve terminating a transmission line with a device which matches its characteristic impedance. 8 pins are equipped with this device. The device is powered by a supply voltage of 5V. It is possible to locate related parts based on the base part number. When a computer or other communication device is attached to a signal interface, there are 8 pins, which are pronged contacts. Consequently, it operates at a minimum operating temperature of 0°C to ensure its reliability. As a result, it operates at a maximum operating temperature of 70°C to ensure its reliability. In Through Hole, it is mounted. In order to ensure proper operation, the supply voltage (Vsup) should be greater than 4V. The maximum supply voltage (Vsup) reaches 40V. It operates at a frequency of 10kHz. This electrical device is powered by 28V voltage. This electronic part supports a maximum of two negative input types -0.2V. In this electrical device, the reference voltage is 1.7V. A 5V power supply is used to operate the device. This device supports an output voltage of 40V. In this electrical device, the bandwidth is 100 kHz.
LM331N Features
8-DIP (0.300, 7.62mm) package
8 terminations
8 pin count
8 pins
5V power supplies
LM331N Applications
There are a lot of Texas Instruments
LM331N V/F & F/V Converters applications.
- Hand-Held Tachometers
- Speed Governors
- Cruise Control
- Automotive Door L ock Control
- Clutch Control
- Horn Control
- Touch or Sound Switches
- lsolation of High Common-Mode Voltages
- Low-Cost Analog-to-Digital Conversion
- Battery Monitoring
