LM3224MM-ADJ Overview
MSOP saves board space. As part of the design of this LED driver, there are 1 outputs that have been used.The system operates on the basis of the frequency 1.25MHz.In this case, it operates with terminations of 0.In this LED driver, the base is configured as 8.On the Surface Mount, a device is mounted.There is no problem with the voltage of 7V.There is 20V voltage output from this device.8 pins are used on the device.The minimal input voltage is 2.7V.In order to achieve the highest efficiency, it is designed to operate at a low voltage of 2.7V.Whenever the maximum supply current is allowed, the value reaches 7V.Temperatures above 125°C should not be allowed to exceed operating temperatures in order to ensure stable operation.Stable operation requires a temperature higher than -40°C.When operating with a maximum output current of 2.45A, it can deliver all the benefits of a LED driver.It is important to keep the output voltage below 20V.A circuit operated by the device has 2.7V volts.Maintain a constant output current of 2.45A.It maintains a 7V minimum voltage output.This device is equipped with an output type of Adjustable.This device utilizes analog IC of SWITCHING REGULATOR.
LM3224MM-ADJ Features
Available in the MSOP package
Frequency of 1.25MHz
LM3224MM-ADJ Applications
There are a lot of Texas Instruments
LM3224MM-ADJ LED Driver ICs applications.
- Portable lighting
- Gallery lighting
- Museum lighting
- High-end retail lighting
- Medical surgery lighting
- Replacement lamps
- Panel lighting
- Down lights
- Linear fluorescent
- A- lamps
