LM3150MHX/NOPB Overview
In the 14-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. There is a Tape & Reel (TR) solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 6V~42V volts and has 6V~42V supply voltage. Suitable for working in an dc switcher that has a -40°C~125°C TJ. It can switch at Up to 1MHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Current Limit, Enable, On Time Control, Soft Start is included in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 14 terminations. This dc dc converter ic uses a variety of control techniques, including HYSTERETIC CURRENT MODE. There is a DC switcher's nominal voltage of 18V. In addition to "LM3150", there are other relevant dc to dc converter ics you can find. There are 14 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. It is recommended that the dc dc voltage regulator's minimum input voltage be 6V. DC regulator outputs 600mV voltage based on test statistics. The dc to dc regulator can only accept 42V input voltage. A starting point for a project is to note down the dc dc regulator's usual output current, which is 12A. Voltage regulator dc to dc is designed to operate at 96 % duty cycle during power-ups and power-downs to ensure reliability. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. DC regulator1MHz has the maximum frequency. Hence, ALSO HAS ADJUSTABLE OUTPUT VOLTAGE DOWN TO 0.6V; ALSO OPERATES IN VOLTAGE MODE is used to better suit the DC to DC voltage regulator's situation. The dc to dc voltage regulator is from the SIMPLE SWITCHER® series. In dormant mode, 3.5mA is used.
LM3150MHX/NOPB Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Current Limit, Enable, On Time Control, Soft Start
HYSTERETIC CURRENT MODE
Max Duty Cycle: 96 %
ALSO HAS ADJUSTABLE OUTPUT VOLTAGE DOWN TO 0.6V; ALSO OPERATES IN VOLTAGE MODE
LM3150MHX/NOPB Applications
There are a lot of Texas Instruments
LM3150MHX/NOPB DC to DC converter applications.
- Network technology
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment
- Balance equipment
- Industrial robots
- Industrial controllers
- Die casting equipment
