LM2902KNE4 Overview
There is a PDIP case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. Upon delivery, op amp ic is packaged in a Rail/Tube case. We are approaching the 14h termination of the year. In total, there are 14 pins on this op amp ic. This linear amplifier should be powered by an 5V battery. 14 pins are located on the operational amplifiers. The input offset voltage is 7mV. The buffer amplifier is capable of operating from a supply current of 1.4mA . There should be no change in the voltage gain at 100dB. For this linear amplifier to work, the temperature should not be below -40°C. In order to avoid damage to the product, instrumentation amplifier should only be used at temperatures below 125°C. The op amp is rated for an operating supply voltage of 4. The operating supply voltage of the buffer op amp is rated at 13V. Under 26V is the minimum supply voltage for this electric component. Over 3V is a recommended supply voltage for buffer ampsIn order for this electronic part to be conducted successfully, you should use a dual supply voltage of 13V.
LM2902KNE4 Features
14 Pins
supply voltage of 5V
100dB voltage gain
LM2902KNE4 Applications
There are a lot of Texas Instruments
LM2902KNE4 Instrumentational OP Amps applications.
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
