LM2901AVQDRG4Q1 Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) to facilitate transportation.A comparator with an output type of CMOS, MOS, Open-Collector, TTL is being used.This chip is designed with the Tape & Reel (TR) package.There are 14 terminals on the comparator.The electrical component in this case belongs to the Comparator families.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.Speaking of types, this is a typical Differential comparator.There are a total of 4 elements in it.A total of 14 pins are included.Electronic comparator is recommended to mount the device using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~125°C .This comparator has 14 pins.If you require more pin-to-pin solutions, search LM2901 for more options.There is a quiescent current of 2.5mA in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Normal use of the device should require a nominal supply current of 2mA .A current supply greater than 2mA may result in the comparator malfunctioning.The device can be run with 5V power supplies.Input current to the device cannot exceed 250nA .Comparator electronics follows that the voltage gain of the part is 100dB .Comparator electronics is a comparator part from the Automotive, AEC-Q100 series.This device is usually used in ADC circuits (packaged in TR ).
LM2901AVQDRG4Q1 Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2901AVQDRG4Q1 Applications
There are a lot of Texas Instruments LM2901AVQDRG4Q1 linear comparators applications.
- Alarm and Monitoring Circuits
- Analog front end
- RC Timers
- Laptop Computers
- Current and voltage sensing
- Window Comparators, Multivibrators
- Portable and Battery-Powered Systems
- High-Speed Differential Line Receiver
- Point of load regulators
- Appliances
