LM2796TL/NOPB Overview
To save board space, it uses the 18-WFBGA package. This mounting method is Surface Mount.It emergys as a DC DC Regulator with high efficiency and reliable performance.The led light driver operates normally at -30°C~85°C TA. It provides considerable benefits for Backlight.A frequency of 500kHz is used to operate it.18 terminations are used in its operation.With a base of 18, this LED light driver is configured.It is possible for undetermined failures to occur if the voltage supply is lower than 2.7V.It is estimated that there are 7 segments.It's mounted by Surface Mount.LED drivers can be found under the base part number LM2796.It is acceptable for the voltage to be 5.5V.The device has a pin count of 18.In addition to Display Drivers, it is also classified by its characteristics.As a result, it runs at a minimal voltage of 2.7V in order to achieve the best efficiency.This electronic component can fully perform its functions when the switching frequency is kept at 500kHz.
LM2796TL/NOPB Features
Available in the 18-WFBGA package
Operating temperature of -30°C~85°C TA
Frequency of 500kHz
Supply voltage of 3V
Switching frequency of 500kHz
LM2796TL/NOPB Applications
There are a lot of Texas Instruments LM2796TL/NOPB LED Driver ICs applications.
- Flicker-free LED Lighting using R1580N
- General lighting
- Dimmable LED for vehicle interiors
- LED backlight driver for LCD displays for portable equipment
- Architectural lighting
- Gallery lighting
- LED headlights
- Street lighting
- Refrigeration lighting
- Linear fluorescent
