LM1877N-9 Overview
Packaged in a SOIC case, the buffer op amp is ready to use. There is a growing number of terminations approaching the number of 14. The pins on this board total to 14 in total. A total of 14 pins are present on the instrumentation amplifier. There is an input offset voltage of 15mV for this buffer op amp. As long as the supply current of the chip does not exceed 25mA, this op amp ic can operate. 70dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 2 channels. For the buffer op amp to operate properly, it must be above the temperature of 0°C degrees Celsius. No temperature greater than 70°C should be used. The operating supply voltage of the buffer op amp is rated at 9V. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 24V. A high supply voltage of more than 6V is recommended for the instrumentation amplifier's supply voltage. In this case, AUDIO AMPLIFIER can be used to sort the op amps by the type of consumer IC in the part.
LM1877N-9 Features
14 Pins
70dB voltage gain
LM1877N-9 Applications
There are a lot of Texas Instruments
LM1877N-9 Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
