LM158AWGRLQMLV Overview
An op amp of this type is a OPERATIONAL AMPLIFIER-type. It is estimated that there will be at least 10 terminations this year. A total of 10 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 10 pins. Op amp ic rates 2mV for input offset voltage. There should be no change in the voltage gain at 93.98dB. There are a total of 2 channels available on the op amps. This instrumentation amplifier cannot operate below -55°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 125°C. The operating supply voltage of the buffer op amp is rated at 16V. It is important to keep in mind that the power supply voltage of this electric component is below 32V, which is suitable. Keeping the linear amplifier's supply voltage above 3V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 16V volts.
LM158AWGRLQMLV Features
10 Pins
supply voltage of 5V
93.98dB voltage gain
LM158AWGRLQMLV Applications
There are a lot of Texas Instruments
LM158AWGRLQMLV Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
