LM139FK Overview
The instrumentation amplifier in this picture is of the COMPARATOR-type. A Rail/Tube case is used for delivering the op amp. During the past two weeks, there have been close to 20 terminations. A total of 20 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 20 pins on it. Op amp rates 5mV as input offset voltage. It is recommended to keep the voltage gain at 106.02dB at all times. On the buffer amps, there are 4 channels that can be used. Buffer amplifier produces OPEN-COLLECTOR signals, which is one of its many benefits. To operate this buffer amplifier, the temperature must not be lower than -55°C. A temperature greater than 125°C should not be used for the operation of this instrumentation amplifier. This electric component can work from a voltage of under 36V as far as supply voltage is concerned. A voltage of 2V or higher is recommended for the linear amplifier's supply voltage. This electrical part should be conducted under the dual supply voltage of 18V volts when you conduct this part.
LM139FK Features
20 Pins
supply voltage of 5V
106.02dB voltage gain
Output Type: OPEN-COLLECTOR
LM139FK Applications
There are a lot of Texas Instruments
LM139FK Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
