LM111JG Overview
There is a CDIP case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the COMPARATOR-type. Upon delivery, op amp ic is packaged in a Rail/Tube case. We are approaching the 8h termination of the year. In total, there are 8 pins on this op amp ic. This linear amplifier should be powered by an 15V battery. 8 pins are located on the operational amplifiers. The input offset voltage is 3mV. There should be no change in the voltage gain at 106.02dB. On the buffer amps, there are 1 channels that can be used. One of the many benefits of this op amp ic is that it emits OPEN-COLLECTOR/OPEN-EMITTER signals. For this linear amplifier to work, the temperature should not be below -55°C. In order to avoid damage to the product, instrumentation amplifier should only be used at temperatures below 125°C. The operating supply voltage of the buffer op amp is rated at 5V. Under 30V is the minimum supply voltage for this electric component. Over 3.5V is a recommended supply voltage for buffer ampsIn order for this electronic part to be conducted successfully, you should use a dual supply voltage of 15V.
LM111JG Features
8 Pins
supply voltage of 15V
106.02dB voltage gain
Output Type: OPEN-COLLECTOR/OPEN-EMITTER
LM111JG Applications
There are a lot of Texas Instruments
LM111JG Instrumentational OP Amps applications.
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
