LF347D Overview
It is packaged in an 14-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a J-FET-type. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. There are 14 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 10mV. This electronic part is best mounted with type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 8mA and 10 . The voltage gain should stay at 100dB. The buffer amp consists of 4 circuits in total. Op amp ic has 4 channels. For this linear amplifier to work, the temperature should not be below 0°C. A temperature greater than 70°C should not be used for the operation of buffer amplifier. According to the specifications of the buffer op amp, the operating supply voltage is rated at 4. The operating supply voltage of the buffer op amp is rated at 18V. There is a recommendation that this electrical part be used with a supply with 8mA current rating. As a rule of thumb, you should conduct this electronic part under a dual voltage supply of 18V volts. The linear amplifier has 4 amplifiers.
LF347D Features
100dB voltage gain
LF347D Applications
There are a lot of Texas Instruments LF347D Instrumentational OP Amps applications.
- Multimedia playback equipment
- Semiconductor detectors
- Test and measurement instruments
- High-frequency data acquisition systems
- Hand-held batteries
- Communication device
- Laptop
- Signal operation
- Video data acquisition
- Exponential operation circuits
