JM38510/11001BCA Overview
In the package, you will find a CDIP-case to contain the op amp ic. There are two types of operational amplifiers in this circuit. As far as the packaging is concerned, buffer op amp is delivered in a Rail/Tube case. It is estimated that there will be at least 14 terminations this year. There are a total of 14 pins on this op amp. As a reminder, this buffer op amp should be powered by 20V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 14 pins. Op amp ic rates 5mV for input offset voltage. 80dB should remain the voltage gain. This op amp needs to be operated at a temperature of not less than -55°C degrees Celsius in order to function properly. A temperature greater than 125°C should not be used for the operation of this instrumentation amplifier. The buffer op amp is rated for an operating voltage of 4 when it comes to the power supply. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 22V. It is recommended that you conduct this electronic part using the dual supply voltage of 22V.
JM38510/11001BCA Features
14 Pins
supply voltage of 20V
80dB voltage gain
JM38510/11001BCA Applications
There are a lot of Texas Instruments JM38510/11001BCA Instrumentational OP Amps applications.
- Radiation thermometry transducers
- Inverse/same-phase proportional circuit
- PDA
- Large motor controllers
- Home audio systems
- Comparator
- Band-pass filter
- Test and measurement instruments
- Proportional counter tubes
- Video amplifiers
