ISO121BG Overview
In the package, you will find a 40-CDIP (0.600, 15.24mm), 16 Leads-case to contain the op amp ic. A Isolation-type buffer amplifier is shown here. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. The number of terminations is approaching the 16 mark. In total, there are 40 pins on this op amp ic. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. 16 pins are included on the operational amplifiers. Op amp ic rates 100mV for input offset voltage. Through Hole is the recommended mounting type of operational amplifiers. In relation to the operating temperature of this buffer op amp, it works well at an average of -25°C~85°C . Using an 4mA supply current, this operational amplifier ics can be operated. There should be no change in the voltage gain. The linear amplifier consists of 1 different elements in total. The operating supply voltage of the buffer op amp is rated at 18V. 200kOhm should be the range of resistance for the linear amplifier.
ISO121BG Features
40 Pins
supply voltage of 15V
0dB voltage gain
Resistance of 200kOhm
ISO121BG Applications
There are a lot of Texas Instruments ISO121BG Instrumentational OP Amps applications.
- Power transmission
- Weighing systems
- Active probe
- Test and measurement instruments
- Mobile phone
- Precision measurement
- High/low-pass filter circuit
- Laptop
- Logarithmic operation circuits
- MP3
