INA321EA/250 Overview
In the package, you will find a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. Op amps are Instrumentation types of amplifier on the chip. In the case of Cut Tape (CT) cases, linear amplifier will be delivered. It consists of a total of 8 pins in total. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. The op amp ic has an array of 8 pins on it. In terms of input offset voltage, operational amplifier rates 1mV. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -55°C~125°C. There should be no change in the voltage gain. In total, there are 1 circuits on this buffer amplifier. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. For the packing of the instrumentation amplifier, TR is adopted. There is an 40μA quiescent current running through op amp ic. 10 TΩ should be the range of resistance for the linear amplifier. As you can see, the linear amplifier has 3 amplifiers.
INA321EA/250 Features
8 Pins
supply voltage of 5V
60dB voltage gain
Output Type: Rail-to-Rail
Resistance of 10 TΩ
INA321EA/250 Applications
There are a lot of Texas Instruments INA321EA/250 Instrumentational OP Amps applications.
- Polarized electrodes
- Portable electronic products powered by batteries
- Navigation
- Comparator
- Strain gauges
- Television
- E-book readers
- Subtraction operation circuits
- Biopotential
- pH (acidity)
