INA217AIP Overview
There is a 8-DIP (0.300, 7.62mm) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the Instrumentation-type. Upon delivery, op amp ic is packaged in a Tube case. In total, there are 8 pins on this op amp ic. This linear amplifier should be powered by an 15V battery. 8 pins are located on the operational amplifiers. The input offset voltage is 250μV. This electrical part should be mounted using type Through Hole. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 10mA . It is recommended to keep the voltage gain at 80dB at all times. This op amp contains 1 circuits. The operating supply voltage of the buffer op amp is rated at 36V. 10mA quiescent currents are flowing through buffer op amp. In order for the op amp resistance to remain within the 60MOhm range, the op amp should be tested. On the linear amplifier, there are 3 amplifiers.
INA217AIP Features
8 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 60MOhm
INA217AIP Applications
There are a lot of Texas Instruments
INA217AIP Instrumentational OP Amps applications.
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
