INA2133U/2K5E4 Overview
In the package, you will find a SOIC-case to contain the op amp ic. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. Linear amplifier is delivered in a Tape and Reel case. The number of terminations approaches 14. It consists of a total of 14 pins in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. The op amp ic has an array of 14 pins on it. With regard to input offset voltage, instrumentation amplifier is rated at 750μV. Maintain 0dB as the voltage gain. In order for op amp to function properly, the temperature should not be lower than -55°C degrees Celsius. You should only use instrumentation amplifier at temperatures that are no higher than 125°C. The buffer op amp is rated for an operating voltage of 2 when it comes to the power supply. The electrical part is capable of being powered by a voltage of under 36V, which means that it can be used with any voltage supply. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 4.5V when using it. The dual supply voltage of 18V should be used for the conduct of this electronic component. The quiescent current is 950μA. 50kOhm should be the range of resistance for the instrumentation amplifier.
INA2133U/2K5E4 Features
14 Pins
supply voltage of 5V
0dB voltage gain
Resistance of 50kOhm
INA2133U/2K5E4 Applications
There are a lot of Texas Instruments INA2133U/2K5E4 Instrumentational OP Amps applications.
- Thermocouples
- Broadcasting
- Cinema or auditorium audio system
- Television broadcasting equipment
- High gain DC amplifier
- Portable docking station
- Computer workstations
- High/low-pass filter circuit
- Video computer boards
- Proportional operation circuits
