INA209AIPWG4 Overview
There is an inclusion of buck boost converter in the package Tube.In this case, voltage regulator has been packaged in the same way as 16-TSSOP (0.173, 4.40mm Width).There is a Surface Mount mounted on this current regulator.Temperatures should not exceed -25°C~85°C during operation.Current regulator is possible to use a voltage input of 0V~26V for the input.In addition to the 16 termination, there are a number of terminations that are used, which are achieved by terminating a transmission line with a voltage regulator that matches the characteristic impedance of the line.As part of the INA209 family, current regulator belongs to this class.As part of a signal interface in a computer or other communication constant current regulator, 16 pins are pronged contacts.Using Surface Mount as a mounting system, this current regulator is mounted.The constant current should work as long as it is powered by a 3.3VV power source, and therefore must be plugged into a 3.3VV outlet.There is a strong/weak growth in the number of channels: 1.As a result, it allows 5.5V to be supplied with its maximum voltage.Part Comparator consists of these current regulations as well as other current regulations.The buck boost converter operates with a minimum supply voltage of 3V.This electrical buck boost converter has a COMPARATOR amplifier type.
INA209AIPWG4 Features
Tube package
INA209 family
The maximal supply voltage of 5.5V
INA209AIPWG4 Applications
There are a lot of Texas Instruments INA209AIPWG4 Current Regulation/Managements applications.
- Power supply current measurement
- Power management
- Transmission controls
- DC motor control
- Diesel injection controls
- Over-current protection
- Battery management
- Suspension controls
- Over-current measurement
- Vehicle dynamic controls
