INA207AIDGSR Overview
Buck boost converter is embedded in the Tape & Reel (TR) package.Voltage regulator is packaged in the way of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width).There is a Surface Mount mounted on this current regulator.In order to ensure the correct operation of the system, the temperature should not exceed -40°C~125°C.Current regulator is possible to use a voltage input of -16V~80V for the input.The 10 termination is a method for terminating a transmission line by connecting a voltage regulator that matches its characteristic impedance, which is the method of terminating a transmission line with a voltage regulator.This is a member of the INA207 family.In computers and other communication constant current regulators, 10 pins are pronged contacts that form part of a signal interface.This current regulator is mounted by Surface Mount.In order to make this constant current work, it needs to be powered by 12VV.Its maximum design flexibility is due to the output current of 1mA.As long as 18V is supplied with the maximum voltage, it is supported.Operational Amplifier is a part that includes these current regulations, all of which are included in one part.As long as the supply voltage is lower than 2.7V, it will operate correctly.Amplifier type COMPARATOR can be found on this electrical buck boost converter.12V power supplies provide power to the boost converter.
INA207AIDGSR Features
Tape & Reel (TR) package
INA207 family
The maximal supply voltage of 18V
12V power supplies
INA207AIDGSR Applications
There are a lot of Texas Instruments INA207AIDGSR Current Regulation/Managements applications.
- Engine management
- Over current monitor
- Over-current protection
- Battery chargers
- Level translating
- Diesel injection controls
- Vehicle dynamic controls
- Battery management
- DC-to-dc converters
- Transmission controls
