INA200AIDGKTG4 Overview
There is a package called Tape & Reel (TR) that contains buck boost converter.A package in the way of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) is used for voltage regulator.Mounted by Surface Mount, this current regulator is a semiconductor.The operating temperature should not exceed -40°C~125°C.The input voltage of -16V~80V is supported as an input voltage.A 8 termination is a method of terminating a transmission line, in which a voltage regulator is used that matches the impedance of the transmission line in order to terminate the line with a 8 termination.There are two types of INA200s in this family.There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications constant current regulator. Using Surface Mount as a mounting system, this current regulator is mounted.It should work as long as it is powered by a 12VV power source. If it does not, it will not work.There is an increase/decrease in the number of channels: 1.It supports the maximal supply voltage of 18V.Operational Amplifier is a part that includes these current regulations, all of which are included in one part.As long as the supply voltage is lower than 2.7V, it will operate correctly.The Amplifier type of this electrical buck boost converter is COMPARATOR.
INA200AIDGKTG4 Features
Tape & Reel (TR) package
INA200 family
The maximal supply voltage of 18V
INA200AIDGKTG4 Applications
There are a lot of Texas Instruments INA200AIDGKTG4 Current Regulation/Managements applications.
- Smart battery packs
- Power management
- Automotive current measurement
- DC motor control
- Over-current measurement
- Power supply current measurement
- Suspension controls
- Over-current protection
- Motor controls
- Vehicle dynamic controls
