INA166UA/2K5 Overview
In order to protect the op amps, a 14-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 14. It consists of a total of 14 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It has 14 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 250μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. In total, there are 1 circuits on this buffer amplifier. As a whole, there are 3 elements that make up this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 36V. As a result of this, the buffer amplifier is packed in TR. There is an 10mA quiescent current in linear amplifier. A minimum voltage gain of 2000 is the minimum voltage gain that this instrumentation amplifier is capable of producing. It is important to keep the resistance within the 60MOhm range of the op amps.
INA166UA/2K5 Features
14 Pins
supply voltage of 5V
Resistance of 60MOhm
INA166UA/2K5 Applications
There are a lot of Texas Instruments
INA166UA/2K5 Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
