INA157U/2K5 Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. This is a Differential type op amp. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins. Please take in mind that this instrumentation amplifier should be run at 15V. In total, the buffer amplifier consists of 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 500μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 2.4mA and 10 . Keeping the voltage gain at 6.02dB is the best course of action. This op amp ic has 1 circuits. Buffer op amp is equipped with 2 channels on the device. As a result, linear amplifier's quiescent current is 2.4mA. The op amp resistance should stay within the range of 24kOhm. Besides the analog ICs used in this instrumentation amplifier, there is also another type of analog IC called ANALOG CIRCUIT IC.
INA157U/2K5 Features
8 Pins
supply voltage of 15V
6.02dB voltage gain
Resistance of 24kOhm
INA157U/2K5 Applications
There are a lot of Texas Instruments INA157U/2K5 Instrumentational OP Amps applications.
- Industrial control system
- RF cable systems
- High/low-pass filter circuit
- Radar
- Vehicle electronics
- Ultrasound transducers
- Automotive sensors
- Signal filtering
- Medical instruments
- High input resistance broadband
